Do not use chemical flushes in these components as the chemicals can damage your engine, transmission, power steering or air condi- tioning. Be certain that the seatback and seat are locked securely into position. Not all child restraint systems will be installed as described here. If the temperature reading does not return to normal, turn the engine off immediately and call for service. Most matters can be re- solved with this process.
Recall Date 2014-06-26 Description This defect can affect the safe operation of the airbag system. The Vehicle Security Light in the instrument cluster will flash to signal that the system is arming. Leaves collected in the air intake may reduce airflow, and if they enter the plenum, they could plug the water drains. Press and release the switch again to turn off the power outlet. Install the bulb and connector assembly into the fog lamp housing and rotate the connector to lock it in place.
Only do service work for which you have the knowledge and the proper equipment. Installing Child Restraints Using the Vehicle Seat Belt The seat belts in the passenger seating positions are. The indica- tor light will flash slowly and then rapidly when fully trained. To prevent ingestion by ani- mals or children, do not store ethylene glycol-based engine coolant antifreeze in open containers or allow it to remain in puddles on the ground. If either of the two hydraulic systems loses normal capability, the remaining system will still function.
The recall began on May 26, 2015. However, if a flatbed towing vehicle is not available, a wheel lift towing vehicle may be used. In most situations, the vehicle will drive normally and will not require towing. Wheel Nuts Tighten all wheel nuts occasionally to eliminate the possibility of wheel studs being sheared or the bolt holes in the wheels becoming elongated. The sudden movement of the seat could cause you to lose control.
It is a true crossover-it will not replace a minivan for utility and people carrying, but it is more and more usable than a sedan or hatch. Be assured that it represents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. Chrysler's number for this recall is R03. Changing the Tail Lamp or Backup Lamp 1. If the light turns on and remains on while driving, safely bring the vehicle to a stop and shut off the engine. Thank you so much, every penny helps. Leaving the Electronic Speed Control system on when not in use is dangerous.
When performing other underhood services, the hood latch, release mechanism and safety catch should be cleaned and lubricated. Aluminum base bulbs are not approved and should not be used for replacement. The key fob if applicable , should also be removed from the key ring. This mode should be used for most driving situations. If you unplugged the device for training, plug it back in at this time. When the tread is worn to the tread wear indicators, the temporary use spare tire needs to be replaced.
A rear-seat entertainment system is available, as is a 368-watt stereo. Reinstall the taillamp housing and fasteners. The child could be badly injured or killed. If a Deployment Occurs The front airbags are designed to deflate immediately after deployment. Maximum cargo volume with both rear rows of seats folded is a decent 67.
Maintenance-Free Battery Your vehicle is equipped with a maintenance-free battery. Underhood Safety Latch Use the hood prop rod to secure the hood in the open position. An in-floor storage bin is located behind each front seat. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol. A child could be badly injured. The turn signal lights will flash to acknowledge the unlock signal.
This should be considered a normal part of the break-in and not inter- preted as an indication of difficulty. Sensors, mounted to each wheel as part of the valve stem, transmit tire pressure readings to the receiver module. The tie down holes on the cross rail ends should always be used to tie down the load. The belt will still retract to remove any slack in the shoulder belt. A belt worn under the arm can cause internal injuries.