We always have great deals on soft and hard tonneaus from industry leading brands. I realized this morning I never added a final picture. Maybe next weekend I can start on it. I have left the two cubby holes alone one on each side of the two drawers as they are handy for bungee cords, rags, small stuff that would blow out of the back. I think I will try making some kind of slide guide using metal angle. I am thinking about drain tubes and using either a flush mount flange or recessed flange connected to a tube leading water out so that the top surface remains flat, so that all the water has a way out and its smooth for a shovel going across it. I can't see them now, but I think there is a couple of plugs in the front wall currently hidden by my tool box maybe they will be at the right height to remove and use as drains, I don't know, we'll see.
Five Future Kits are also in the works. It was an attention getter. Our Chevy Silverado accessories are custom-made for your truck's make and model. I do plan on weatherproofing the top of it and eventually putting a topper on within a couple months For weatherproofing I plan coating the top with a product made by Sealoflex or Hydrostop. Finally got the truck back and my wife had picked it up for me as I couldn't make it there before closing and she was rear ended by a drunk driver on the way home! It would help contain it, and limit what got on the drill. I got the info from reading about the slp intake.
This choice is available on a limited basis. In the meantime I plan on weatherproofing the top of the drawer platform. I have not seen under the hood of a nnbs truck, so I guess this mainly applys to a nbs truck, I have a 2000 silverado 5. A body shop had my truck for two weeks replacing the front bumper and the plastic around it. Holy smokes its been a crazy month! Here's a Handy spot for a digital clock.
It doesn't matter if you have a Daily Driver, Hauler, Off-road or Racing truck. No matter what you buy from AutoAcccessoriesGarage. The kits provide the mounts that adapt other done-truck parts, including the steering column, wiring and brake system. They are definitely handy, and really don't take up much space. She's doing ok and so is my son who was with her. Granite Falls Coating does the powder coating of the parts. Now I got this idea from the slp cold air intake, it actually comes with a new bottom metal plate with the holes done already so it can suck from the bottom.
So I started looking around for options. Nonetheless, the Raptor brand has really made a name for itself in the world of Chevy Silverado step bars. This selling tool is so detailed that it even has a taillight on one side and a chrome plated exhaust pipe extension. The couplings are a hair small but stretch easy, you can also use wd-40 to help them slide in. I would throw a mattress on top of the platform and could swap out some tools for camping supplies.
I took my measurements today. Make sure they line up good when you put metal plate back on and snap bottom of air box back on. There was also a lot of gravel that got caught between the tank and the factory plastic shields A stone caught in the shield rubbed a hole in one of the tanks I had to replace. Perfect for tow straps, etc. The rubber strip is black and not really visible in this picture, if someone wants a close up picture then I will post it.
Ok you leave the two holes that go into your fender and I left the foam on there as well. Talk about your center console, seats, door handles, upholstery, steering wheels or any other item in the cab of your pickup. This box has been on my truck since 1992. I installed it in September. I use to have an avalanche, but this is so much easier and more practical for me. I was able to start on the drawer frame assembly today! Then they painted it but the spacing was still crooked so they told me they were going to try a oem bumper to see if it would fit better.
There is also a Universal Kit for owners of Ford, Dodge, International, Studebaker and other trucks. This was in case I hit water when I broke through the side of the box. I removed the broken old one, and popped this one in. He then went to work for Montevideo Technology, Inc. Available in multiple diameters, these bars even feature a lifetime warranty.
They lock, but are not the most secure place for items. Simple Chevy Truck Modifications - Chuck's Chevy Truck Pages. What else is there that is cheap? Oh, for drawer slide hardware I'm using skateboard bearings which I saw on another diy project. My skateboard bearings came today. If I can do it, anyone can!!! That afternoon while it was still frozen, I drilled a hole on the side near the bottom to let the water drain out. Tomorrow I hope to figure out my drawer slide set up and put the top on and get that waterproofed.
Lipinski told Second Chance Garage that business is good. Not to mention that it looks great and is extremely functional. I'm thinking of utilizing boat deck style hatches so they will be as waterproof as reasonably possible. James Bond and your Chevy Silverado have two things in common: they both wear their bow ties proudly, and they both mean serious business. He had half of a restored 1949-1964 Chevrolet Advanced-Design pickup truck body sitting on one of his Turn-Key S10 chassis. Once I got it, I was a little intimidated that I wouldn't be able to install it by myself, due to the fact that I am not the most experienced car part installer.