I was not going to drive the car and get stranded somewhere on the road. There can be errors in the text. Led to total transmission failure, stranding me on the side of the road. I am researching how to get the tcm to communicate with the engine computer. I love my car, but I am afraid to drive it now! Started last year, taillight worked, but drivers side brake light didn't. A problem was reported 2-3 years prior re shifting inconsistently but nothing was found. I stopped at a light and when I went to take off from the light it seemed like I had no power.
The vehicle rolled back while the brake pedal was still depressed. They found fluid pressure switches damaged, replaced tcm and sol assembly. I replaced the transmission after the warranty had expired. I had the vehicle towed to my home where it has been sitting. The hood release was not working because the hood release cable was stretched and bent.
The problem does not seem to occur when the car is warmed up and being driven under normal use. The consumer contacted the dealer who indicated that the problem was the transmission module. Technician should turn off the ignition and cancel retained accessory power. The air bag and horn were also replaced. When at a stop idle seems to drop and when accelerating from stop, vehicle hestiates and lurches. The failure mileage was 4,800 and current mileage was 16,311.
Also, a bullet was added to the dexos 2? Had to replaced every electronic component in this vehicle. I was not going to drive the car and get stranded somewhere on the road. Some vehicles may experience a cracked or fractured transmission wave plate, resulting in a loss of 3rd, 5th and reverse gears. All this problems have caused me to missed work and spend money I don't have, I do not want to continue having problems that can be avoided. Luckily it was still under warranty 20000 mi Mechanic recommended replacement of torque converter gasket. While driving 45 mph and attempting to accelerate, the engine would run but the vehicle would not move. Service engine soon ses light on.
Technician will gain access to the roller rockers to inspect them. Technician will need to inspect for loose timing chains or tensioners. To help ease the ordering of large amounts of parts during service. Technician may find a 4. Technician will need to block off the hoses near the cooler connection with appropriate clamps. In reverse, applying the brakes stops the car, and then selecting drive, the vehicle responds to the accelerator correctly.
Technician will need to block off the hoses near the cooler connection with appropriate clamps. Re-imaged, if problem continues dealer says it will have to be replaced. This was the second time that the transmission failed. While at a traffic light with the brake pedal depressed, the engine shut off and restarted. I noticed as I sped up - finally - that the transmission would not shift. The same thing happens in forward, but in most cases the accelerator is engaged to move forward.
I thank god there was nobody behind me because this could have cause an accident. Problem is, if you don't fix it, it'll cause other systems to fail. On Friday November 23, 2013 I picked up my car and was told the problem was fixed, but on November 25, 2013 as I was driving to the store the problem started again, going about 35 miles the car jerked back so bad that I almost hit my head on the steering wheel. Many others have had the same problem. I thank god there was nobody behind me because this could have cause an accident. Now the transmission control module is defective.
This is controlled by the throttle actuator control tac and the power control module pcm. These leaks are often due to vehicle operation with a low engine coolant level and may result in water pump failure. Taken in to the dealership, a slipping transmission was diagnosed and it was replaced for another different number original gm transmission part number, cooler flushed, tcm calibrated. I assume that the motor is failing, but have not experienced a reduced engine power mode or engine shutdown mode event. Replaced ball bearings but problem still existed. The dealer stated that there was a new recall related to the emission, but they could not perform the repair.
Technician will gain access to the roller rockers to inspect them. While in the United States they are unable to receive Turn-by-Turn directions. Manufacturers can voluntarily recall cars for problems that do not affect these, though. Technician may find Diagnostic Trouble Code P0442. Local mechanic replaced camshaft parts. Also a whining noise was heard coming from the engine compartment idling and when moving.